[Buildroot] Stupid n00b question about U-Boot config

[Fry, Charles R. {Chuck}(ARC-TI)[Stinger Ghaffarian Technologies Inc. (SGT Inc.)]]

Thank you, this is the information I needed!
 -- Chuck
 
On Aug 22, 2012, at 1:26 AM, Thomas Petazzoni wrote:

> Le Tue, 21 Aug 2012 18:41:43 -0500,
> "Fry, Charles R. {Chuck}(ARC-TI)[Stinger Ghaffarian Technologies Inc.
> (SGT Inc.)]" <chuck.fry at nasa.gov> a écrit :
> 
>> make[1]: Entering directory `/home/cfry/buildroot/buildroot-2012.05/output/build/uboot-2012.04.01'
>> make: *** No rule to make target `at91sam9260ek_config'.  Stop.
> 
> U-Boot does not have a at91sam9260ek configuration. The available
> configuration for this board are:
> 
>  at91sam9260ek_dataflash_cs0
>  at91sam9260ek_dataflash_cs1
>  at91sam9260ek_nandflash
> 
> see boards.cfg in U-Boot source code for the list of available
> configurations.
> 
> Best regards,
> 
> Thomas
> -- 
> Thomas Petazzoni, Free Electrons
> Kernel, drivers, real-time and embedded Linux
> development, consulting, training and support.
> http://free-electrons.com

Chuck Fry
Senior Software Engineer
Dell | Services, Federal Government
Office: 650 604 1882  Mobile: 408 230 2715
M/S 269-1, Building N269/260-7
NASA Ames Research Center
Moffett Field, CA 94035-1000

I do not speak for Dell, SGT, Code TI, or NASA, nor do they speak for me.