[Buildroot] [PATCH] defconfigs: add sama5d3 support

[ludovic.desroches at atmel.com]

From: Ludovic Desroches <ludovic.desroches at atmel.com>

Defconfig file for boards based on sama5d3x devices.

Signed-off-by: Ludovic Desroches <ludovic.desroches at atmel.com>
---

Hi,

This is a basic defconf file for sama5d3 devices. at91boostrap, u-boot, linux
stuff will come later.

>From the top of my head Alexandre Belloni told me that some flags have to be
added for hardware floating point use. It was on a previous version when
hard floating has been introduced. Is it still true or does selecting EABIHF is
enough?

Regards

Ludovic

 configs/sama5d3_defconfig |  104 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 104 insertions(+)
 create mode 100644 configs/sama5d3_defconfig

diff --git a/configs/sama5d3_defconfig b/configs/sama5d3_defconfig
new file mode 100644
index 0000000..d54e76d
--- /dev/null
+++ b/configs/sama5d3_defconfig
@@ -0,0 +1,104 @@
+BR2_arm=y
+BR2_cortex_a5=y
+BR2_ARM_EABIHF=y
+BR2_ARM_FPU_VFPV4D16=y
+BR2_ARM_INSTRUCTIONS_THUMB2=y
+BR2_TOOLCHAIN_EXTERNAL=y
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV=y
+BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.20.x.config"
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_ALSA_UTILS=y
+BR2_PACKAGE_ALSA_UTILS_ALSACONF=y
+BR2_PACKAGE_ALSA_UTILS_AMIXER=y
+BR2_PACKAGE_ALSA_UTILS_APLAY=y
+BR2_PACKAGE_ALSA_UTILS_SPEAKER_TEST=y
+BR2_PACKAGE_FFMPEG=y
+BR2_PACKAGE_FFMPEG_GPL=y
+BR2_PACKAGE_FFMPEG_NONFREE=y
+BR2_PACKAGE_FFMPEG_POSTPROC=y
+BR2_PACKAGE_GSTREAMER=y
+BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_VIDEORATE=y
+BR2_PACKAGE_GST_PLUGINS_BASE_PLUGIN_ALSA=y
+BR2_PACKAGE_GST_PLUGINS_GOOD=y
+BR2_PACKAGE_GST_PLUGINS_GOOD_JPEG=y
+BR2_PACKAGE_GST_PLUGINS_GOOD_PNG=y
+BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_VIDEOFILTER=y
+BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_V4L2=y
+BR2_PACKAGE_GST_PLUGINS_BAD=y
+BR2_PACKAGE_GST_PLUGINS_BAD_PLUGIN_COLORSPACE=y
+BR2_PACKAGE_GST_PLUGINS_BAD_PLUGIN_MPEGDEMUX=y
+BR2_PACKAGE_GST_PLUGINS_BAD_PLUGIN_MPEGTSDEMUX=y
+BR2_PACKAGE_GST_PLUGINS_BAD_PLUGIN_VIDEOFILTERS=y
+BR2_PACKAGE_GST_PLUGINS_BAD_PLUGIN_DIRECTFB=y
+BR2_PACKAGE_GST_PLUGINS_BAD_PLUGIN_FBDEV=y
+BR2_PACKAGE_GST_PLUGINS_UGLY=y
+BR2_PACKAGE_GST_PLUGINS_UGLY_PLUGIN_MPEG2DEC=y
+BR2_PACKAGE_GST_FFMPEG=y
+BR2_PACKAGE_MPG123=y
+BR2_PACKAGE_MPLAYER=y
+BR2_PACKAGE_BZIP2=y
+BR2_PACKAGE_GZIP=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_MEMSTAT=y
+BR2_PACKAGE_NETPERF=y
+BR2_PACKAGE_STRACE=y
+BR2_PACKAGE_TAR=y
+BR2_PACKAGE_MTD=y
+BR2_PACKAGE_MTD_FLASH_OTP_DUMP=y
+BR2_PACKAGE_MTD_FLASH_OTP_INFO=y
+BR2_PACKAGE_MTD_MKFSJFFS2=y
+BR2_PACKAGE_FBV=y
+BR2_PACKAGE_QT=y
+BR2_PACKAGE_DEVMEM2=y
+BR2_PACKAGE_EEPROG=y
+BR2_PACKAGE_EVTEST=y
+BR2_PACKAGE_I2C_TOOLS=y
+BR2_PACKAGE_IOSTAT=y
+BR2_PACKAGE_LM_SENSORS=y
+BR2_PACKAGE_RNG_TOOLS=y
+BR2_PACKAGE_SETSERIAL=y
+BR2_PACKAGE_STATSERIAL=y
+BR2_PACKAGE_USBUTILS=y
+BR2_PACKAGE_USBUTILS_ZLIB=y
+BR2_PACKAGE_PYTHON=y
+BR2_PACKAGE_PYTHON_CURSES=y
+BR2_PACKAGE_PYTHON_READLINE=y
+BR2_PACKAGE_PYTHON_NETIFACES=y
+BR2_PACKAGE_PYTHON_SERIAL=y
+BR2_PACKAGE_PYTHON_SETUPTOOLS=y
+BR2_PACKAGE_SQLITE=y
+BR2_PACKAGE_ZXING=y
+BR2_PACKAGE_ARGP_STANDALONE=y
+BR2_PACKAGE_BRIDGE_UTILS=y
+BR2_PACKAGE_CAN_UTILS=y
+BR2_PACKAGE_DROPBEAR=y
+BR2_PACKAGE_EBTABLES=y
+BR2_PACKAGE_ETHTOOL=y
+BR2_PACKAGE_IPERF=y
+BR2_PACKAGE_IPROUTE2=y
+BR2_PACKAGE_IPTABLES=y
+BR2_PACKAGE_IW=y
+BR2_PACKAGE_LRZSZ=y
+BR2_PACKAGE_MACCHANGER=y
+BR2_PACKAGE_MII_DIAG=y
+BR2_PACKAGE_OPENSSH=y
+BR2_PACKAGE_PORTMAP=y
+BR2_PACKAGE_TCPDUMP=y
+BR2_PACKAGE_WIRELESS_TOOLS=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_EAP=y
+BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
+BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
+BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT=y
+BR2_PACKAGE_WPA_SUPPLICANT_WPS=y
+BR2_PACKAGE_BASH=y
+BR2_PACKAGE_FILE=y
+BR2_PACKAGE_CPULOAD=y
+BR2_PACKAGE_VIM=y
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_JFFS2=y
+BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_2K_128K=y
+BR2_TARGET_ROOTFS_UBIFS=y
+BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000
+BR2_TARGET_ROOTFS_UBI=y
+BR2_TARGET_ROOTFS_UBI_SUBSIZE=2048
-- 
1.7.9.5