[Buildroot] [PATCH v2] board/freescale: switch create-boot-sd.sh to parted
Arnout Vandecappelle
arnout at mind.be
Wed Oct 21 18:37:45 UTC 2015
On 21-10-15 10:57, Vincent Stehlé wrote:
> Starting with version 2.26, sfdisk defaults to a unit of 512 B sectors.
> With those recent versions of sfdisk, the create-boot-sd.sh script ends
> up creating a boot partition of 240 KB, which is too small to contain a
> Linux kernel.
>
> As it is difficult to address both pre and post v2.26 sfdisk versions in
> a single command, we change the create-boot-sd.sh script to use parted
> instead. While at it, we set the boot partition size to 64 MB, which
> should be enough for everyone.
>
> Signed-off-by: Vincent Stehlé <vincent.stehle at freescale.com>
> Cc: Luca Ceresoli <luca at lucaceresoli.net>
> Cc: Gary Bisson <gary.bisson at boundarydevices.com>
>
> ---
>
>
> Hi,
>
> This is a second proposal, using parted this time. Even with sfdisk
> `--unit' parameter, I could not find an eleguant solution to support all
> versions of sfdisk, sorry. Please let me know if you find switching to
> parted acceptable.
I really don't like that we would rely on a tool installed on the host.
Is there any reason why genimage (cfr. wandboard) wouldn't work, like I
suggested earlier?
Regards,
Arnout
>
> This is tested on Sabre AI with an i.MX6 Quad.
>
> Best regards,
>
> V.
>
>
> Changes in v2
> -------------
> - Switch to parted, as advised by Gary.
> - Fix spelling in commit message, spotted by Luca.
>
>
> board/freescale/create-boot-sd.sh | 10 ++++++----
> 1 file changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/board/freescale/create-boot-sd.sh b/board/freescale/create-boot-sd.sh
> index af45115..d80bd52 100755
> --- a/board/freescale/create-boot-sd.sh
> +++ b/board/freescale/create-boot-sd.sh
> @@ -59,10 +59,12 @@ sync
> # - Bootloader at offset 1024
> # - FAT partition starting at 1MB offset, containing uImage and *.dtb
> # - ext2/3 partition formatted as ext2 or ext3, containing the root filesystem.
> -sfdisk ${DEV} <<EOF
> -32,480,b
> -512,,L
> -EOF
> +parted --script "${DEV}" \
> + mklabel msdos \
> + unit MiB \
> + mkpart primary fat16 1 64 \
> + mkpart primary ext2 64 100% \
> + print
>
> sync
>
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF
More information about the buildroot
mailing list