[Buildroot] Analysis of build results for 2016-08-09

[Waldemar Brodkorb]

Hi Thomas,
Thomas Petazzoni wrote,

> Hello all,
> 
> Please find below the usual analysis of build failures. Hiroshi,
> Waldemar, Gustavo, Fabrice, Yann, Dagg, Jörg, Vivien, Vicente, Samuel,
> Peter, Joris, Alistair, please have a look below, there's some fun
> stuff for you! :-) Thanks for your help.
> 
> Thomas
> 
> >         bfin |                   cairo-1.14.6 | NOK | http://autobuild.buildroot.net/results/88b02a5dd5408318941ccbfcea0a9cbaa331500a/
> 
> libpixman-1.so: undefined reference to `__emutls_get_address'
> 
> Waldemar, can you have a look?

Unfortunately this fails for the same reason as any C++ application.
__emutls_get_address is defined in libgcc_s.so.1 and is LOCAL
instead of GLOBAL.
When we fix the C++ problem, we have a solution for alsa-libs and
cairo.
 
> >         m68k |                  clapack-3.2.1 | NOK | http://autobuild.buildroot.net/results/f34ad4f0cf094fa31b7dc18522e9eedfc5c2c940/
> 
> /tmp/cctGT3zI.s: Assembler messages:
> /tmp/cctGT3zI.s:14834: Error: value -34500 out of range
> /tmp/cctGT3zI.s:15075: Error: value -35250 out of range
> /tmp/cctGT3zI.s:15528: Error: value -45542 out of range
> /tmp/cctGT3zI.s:15529: Error: value -45566 out of range
> /tmp/cctGT3zI.s:15539: Error: value -45886 out of range
> 
> Waldemar ?

Didn't we disabled clapack for m86k coldfire in 
7b75d8c3fa7b234c948ff37c4f14467900083036 ?
 
> >       xtensa |                  jack2-v1.9.10 | NOK | http://autobuild.buildroot.net/results/b593d422f394f1ed6a91faaa5ff73c769d523abb/
> 
> The NGREG issue. I worked on this yesterday, I have some improvements,
> but it's not yet ready :-/

May be you could add Max Filippov to Cc? He is always helpful with any
Xtensa problems.
 
> >         m68k |                  libxml2-2.9.4 | NOK | http://autobuild.buildroot.net/results/8a4e26bb1c0c64759e3914eced0a36baa0967f0b/
> 
> Waldemar, another "relocation truncated to fit: R_68K_GOT16O" for
> you :-)

Patch ready.
 
> >         m68k |        poco-poco-1.7.2-release | NOK | http://autobuild.buildroot.net/results/791917c1343f53e12f27b06cfd5e1d2e88078014/
> >         m68k |        poco-poco-1.7.2-release | NOK | http://autobuild.buildroot.net/results/349d4b49d65a652551c4de20233684bb4ffa5ae3/
> 
> #error Target architecture was not detected as supported by Double-Conversion.
> 
> Probably we need to disable this package on m68k. Waldemar?

I'll take a look now.
 
best regards
 Waldemar