[Buildroot] [Bug 9226] New: Firefly boot fails with: "failed to find part:boot"
Thomas Petazzoni
thomas.petazzoni at free-electrons.com
Sun Sep 11 19:29:09 UTC 2016
Hello,
Ezequiel, you are the last person who updated the firefly defconfig, so
I assume you have access to the board. Could you have a look at the bug
report below?
Thanks!
Thomas
On Sun, 11 Sep 2016 15:19:57 +0000, bugzilla at busybox.net wrote:
> https://bugs.busybox.net/show_bug.cgi?id=9226
>
> Bug ID: 9226
> Summary: Firefly boot fails with: "failed to find part:boot"
> Product: buildroot
> Version: 2016.05
> Hardware: All
> OS: Linux
> Status: NEW
> Severity: normal
> Priority: P5
> Component: Other
> Assignee: unassigned at buildroot.uclibc.org
> Reporter: ciro.santilli at gmail.com
> CC: buildroot at uclibc.org
> Target Milestone: ---
>
> Tested on 2016.05 and master @ a26aa9686ad457d208df3b85a39c9befa04caaa3
>
> Followed instructions under board/firefly/firefly-rk3288/readme.txt
>
> Then from a TTL I see:
>
> arm pll = 600000000HZ
> periph pll = 300000000HZ
> ddr pll = 200000000HZ
> codec pll = 594000000HZ
> Board: Rockchip platform Board
> DRAM: Found dram banks:1
> Adding bank:0000000000000000(0000000080000000)
> 128 MiB
> SDCard Update.
> storage init OK!
> Using default environment
>
> GetParam
> W: Invalid Parameter's tag (0x7BD32A6C)!
> Invalid parameter
> W: Invalid Parameter's tag (0xF07F8F7D)!
> Invalid parameter
> W: Invalid Parameter's tag (0xAE8ED94E)!
> Invalid parameter
> W: Invalid Parameter's tag (0x5EFFD968)!
> Invalid parameter
> W: Invalid Parameter's tag (0xEDDF0B28)!
> Invalid parameter
> W: Invalid Parameter's tag (0xE89DA830)!
> Invalid parameter
> W: Invalid Parameter's tag (0x00000802)!
> Invalid parameter
> W: Invalid Parameter's tag (0x00000000)!
> Invalid parameter
> failed to find part:boot
> failed to prepare fdt from boot!
> failed to find part:resource
> failed to prepare fdt from resource!
> no adc node
> can't find dts node for led
> can't find dts node for ricoh619
> can't find dts node for act8846
> can't find dts node for rk808
> can't find dts node for rk818
> Can't find dts node for fuel guage cw201x
> SecureBootEn = 0, SecureBootLock = 0
>
> #Boot ver: 0000-00-00#0.00
> empty serial no.
> unknown reboot type 1
> no fuel gauge found
> no fuel gauge found
> read logo_on switch from dts [0]
> no fuel gauge found
> failed to find part:recovery
> 'recovery' does not seem to be a partition nor an address
> Unable to boot:recovery
> try to start backup
> failed to find part:backup
> 'backup' does not seem to be a partition nor an address
> Unable to boot:backup
> try to start rockusb
>
> but get no shell.
>
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
More information about the buildroot
mailing list