[Buildroot] [PATCH v2 1/1] package/rcw: Optional RCW Generation
Jared Bents
jared.bents at rockwellcollins.com
Wed May 22 19:36:16 UTC 2019
Hi Thomas,
On Mon, Feb 25, 2019 at 10:10 AM <jared.bents at rockwellcollins.com> wrote:
>
> From: Jared Bents <jared.bents at rockwellcollins.com>
>
> Update to add an optional RCW generation using
> BR2_PACKAGE_HOST_RCW_CUSTOM_PATH with no modification
> to the RCW package source.
>
> --
> [v1 -> v2]: * Removed host-python dependency
> * Updated help for BR2_PACKAGE_HOST_RCW_CUSTOM_PATH
> * Added error for number of .rcw not equal to 1
> * Removed symlinks
> * Split large install command into different commands
> * Resolved utils/check-package warnings
>
It's been a little while since I submitted v2, was there anything else
that I should update?
> Signed-off-by: Jared Bents <jared.bents at rockwellcollins.com>
> ---
> package/rcw/Config.in.host | 16 ++++++++++++++++
> package/rcw/rcw.mk | 32 ++++++++++++++++++++++++++++++++
> 2 files changed, 48 insertions(+)
>
> diff --git a/package/rcw/Config.in.host b/package/rcw/Config.in.host
> index ba40f76de9..34f211a8ff 100644
> --- a/package/rcw/Config.in.host
> +++ b/package/rcw/Config.in.host
> @@ -10,3 +10,19 @@ config BR2_PACKAGE_HOST_RCW
> then use this toolset and examples.
>
> https://source.codeaurora.org/external/qoriq/qoriq-components/rcw/
> +
> +if BR2_PACKAGE_HOST_RCW
> +
> +config BR2_PACKAGE_HOST_RCW_CUSTOM_PATH
> + string "RCW Source file paths"
> + help
> + Space-separated list of .rcw and .rcwi files, that will be
> + used to generate a RCW binary. The entire list of .rcwi files
> + used by the .rcw file must be specified. There must be a
> + single .rcw file in the list.
> +
> + This is optional. If left empty, the RCW package will be
> + included for use in the SDK or with post scripts but the
> + binary will not be generated.
> +
> +endif
> diff --git a/package/rcw/rcw.mk b/package/rcw/rcw.mk
> index f4570b9bde..1b7a73f6e5 100644
> --- a/package/rcw/rcw.mk
> +++ b/package/rcw/rcw.mk
> @@ -10,11 +10,43 @@ RCW_SITE_METHOD = git
> RCW_LICENSE = BSD-3-Clause
> RCW_LICENSE_FILES = LICENSE
>
> +# The name of the file to be deliveried in the BINARIES_DIR
> +RCW_DELIVERY_FILE = PBL.bin
> +
> +# Get the name of the custom rcw file from the custom list
> +RCW_PROJECT = $(filter %.rcw,$(notdir $(call qstrip,$(BR2_PACKAGE_HOST_RCW_CUSTOM_PATH))))
> +
> +# Error if there is more than one .rcw file
> +ifneq ($(RCW_PROJECT),)
> +ifneq ($(words $(RCW_PROJECT)),1)
> +$(error BR2_PACKAGE_HOST_RCW_CUSTOM_PATH)
> +endif
> +endif
> +
> +ifneq ($(RCW_PROJECT),)
> +define HOST_RCW_ADD_CUSTOM_RCW_FILES
> + mkdir -p $(@D)/custom_board/rcw
> + cp -f $(filter %.rcwi,$(call qstrip,$(BR2_PACKAGE_HOST_RCW_CUSTOM_PATH))) $(@D)/custom_board
> + cp -f $(filter %.rcw,$(call qstrip,$(BR2_PACKAGE_HOST_RCW_CUSTOM_PATH))) $(@D)/custom_board/rcw
> +endef
> +HOST_RCW_POST_PATCH_HOOKS += HOST_RCW_ADD_CUSTOM_RCW_FILES
> +
> +define HOST_RCW_BUILD_CMDS
> + python $(@D)/rcw.py -i $(@D)/custom_board/rcw/$(RCW_PROJECT) -I $(@D)/custom_board -o $(@D)/$(RCW_DELIVERY_FILE)
> +endef
> +
> +define HOST_RCW_INSTALL_DELIVERY_FILE
> + $(INSTALL) -D -m 0644 $(@D)/$(RCW_DELIVERY_FILE) $(BINARIES_DIR)/$(RCW_DELIVERY_FILE)
> +endef
> +endif
> +
> # Copy source files and script into $(HOST_DIR)/share/rcw/ so a developer
> # could use a post image or SDK to build/install PBL files.
> define HOST_RCW_INSTALL_CMDS
> mkdir -p $(HOST_DIR)/share/rcw
> cp -a $(@D)/* $(HOST_DIR)/share/rcw
> + $(HOST_RCW_INSTALL_DELIVERY_FILE)
> + find $(HOST_DIR)/share/rcw -name "*.bin" -delete
> endef
>
> $(eval $(host-generic-package))
> --
> 2.18.0
>
Thank you,
Jared
More information about the buildroot
mailing list