[Buildroot] [PATCH 1/2] package/sunxi-mali-utgard: rename from sunxi-mali-mainline
Giulio Benetti
giulio.benetti at benettiengineering.com
Thu Nov 4 17:23:58 UTC 2021
Hi Luca,
On 11/4/21 10:26 AM, Luca Ceresoli wrote:
> Hi Giulio,
>
> thanks for these and the other olimex patches you are sending. Thomas
> applied them faster than I could review and test them... let me try this
> time :)
I've just sent the v2 series, do we wait until you give a Tested-by: ?
Thanks for reviewing!
--
Giulio Benetti
Benetti Engineering sas
> On 04/11/21 07:38, Giulio Benetti wrote:
>> From: Miquel Raynal <miquel.raynal at bootlin.com>
>>
>> This package provides Mali libraries for Sunxi Mali Utgard GPUs. The
>> trailing -mainline is historical and was used at a time when there was
>> two packages providing these libraries. The "non-upstream" package has
>> been removed some time ago so before adding new packages bringing
>> support for other ARM Mali GPU versions or implementations, rename
>> sunxi-mali-mainline into sunxi-mali-utgard.
>>
>> Add a legacy entry.
>>
>> Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
>> Signed-off-by: Giulio Benetti <giulio.benetti at benettiengineering.com>
>> [Giulio: rebase on master. Rename SUNXI_MALI_MAINLINE_REV to
>> SUNXI_MALI_UTGARD_REV in sunxi-mali-mailine-driver.mk and
>> BR2_PACKAGE_SUNXI_MALI_MAINLINE to BR2_PACKAGE_SUNXI_UTGARD in
>> sunxi-mali-mainline-driver/Config.in to respect bisectability]
>
> [...]
>
>> diff --git a/configs/olimex_a20_olinuxino_lime2_defconfig b/configs/olimex_a20_olinuxino_lime2_defconfig
>> index ed279326bc..d0ebeb53a3 100644
>> --- a/configs/olimex_a20_olinuxino_lime2_defconfig
>> +++ b/configs/olimex_a20_olinuxino_lime2_defconfig
>> @@ -32,7 +32,7 @@ BR2_LINUX_KERNEL_INSTALL_TARGET=y
>>
>> # sunxi packages
>> BR2_PACKAGE_SUNXI_TOOLS=y
>> -BR2_PACKAGE_SUNXI_MALI_MAINLINE=y
>> +BR2_PACKAGE_SUNXI_MALI_UTGARD=y
>> BR2_PACKAGE_SUNXI_MALI_MAINLINE_DRIVER=y
>>
>> # Filesystem
>> diff --git a/configs/olimex_a20_olinuxino_lime_defconfig b/configs/olimex_a20_olinuxino_lime_defconfig
>> index cd88a2d19a..000071b11c 100644
>> --- a/configs/olimex_a20_olinuxino_lime_defconfig
>> +++ b/configs/olimex_a20_olinuxino_lime_defconfig
>> @@ -32,7 +32,7 @@ BR2_LINUX_KERNEL_INSTALL_TARGET=y
>>
>> # sunxi packages
>> BR2_PACKAGE_SUNXI_TOOLS=y
>> -BR2_PACKAGE_SUNXI_MALI_MAINLINE=y
>> +BR2_PACKAGE_SUNXI_MALI_UTGARD=y
>> BR2_PACKAGE_SUNXI_MALI_MAINLINE_DRIVER=y
>>
>> # Filesystem
>
> Both lime defconfigs still have this line:
>
> # glibc is needed for sunxi-mali-mainline-package.
>
> which sould be updated.
>
> While there, please change replace "-package" -> " package".
>
> The rest looks good.
>
More information about the buildroot
mailing list