[Buildroot] [git commit branch/next] configs/ls1028ardb: new defconfig
Thomas Petazzoni
thomas.petazzoni at bootlin.com
Tue Aug 23 21:18:20 UTC 2022
commit: https://git.buildroot.net/buildroot/commit/?id=75cb88ae667002454aa3a3ec2b927cd171f3bfff
branch: https://git.buildroot.net/buildroot/commit/?id=refs/heads/next
This is the reference design board for the NXP LS1028a SoC.
see https://www.nxp.com/design/qoriq-developer-resources/layerscape-ls1028a-reference-design-board:LS1028ARDB
Signed-off-by: Francois Perrad <francois.perrad at gadz.org>
Reviewed-by: Giulio Benetti <giulio.benetti at benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at bootlin.com>
---
DEVELOPERS | 2 +
board/freescale/ls1028ardb/genimage.cfg | 23 +++++++++
board/freescale/ls1028ardb/readme.txt | 60 ++++++++++++++++++++++
.../rootfs_overlay/boot/extlinux/extlinux.conf | 4 ++
.../etc/udev/rules.d/73-fsl-enetc-networking.rules | 16 ++++++
configs/ls1028ardb_defconfig | 56 ++++++++++++++++++++
6 files changed, 161 insertions(+)
diff --git a/DEVELOPERS b/DEVELOPERS
index 34cce542bd..55b23ebef2 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1020,9 +1020,11 @@ N: Francisco Gonzalez <gzmorell at gmail.com>
F: package/ser2net/
N: Francois Perrad <francois.perrad at gadz.org>
+F: board/freescale/ls1028ardb/
F: board/olimex/a20_olinuxino
F: board/olimex/imx233_olinuxino/
F: board/olimex/stmp1_olinuxino/
+F: configs/ls1028ardb_defconfig
F: configs/olimex_a20_olinuxino_*
F: configs/olimex_imx233_olinuxino_defconfig
F: configs/olimex_stmp157_olinuxino_lime_defconfig
diff --git a/board/freescale/ls1028ardb/genimage.cfg b/board/freescale/ls1028ardb/genimage.cfg
new file mode 100644
index 0000000000..3efef0bffc
--- /dev/null
+++ b/board/freescale/ls1028ardb/genimage.cfg
@@ -0,0 +1,23 @@
+image sdcard.img {
+ hdimage {
+ }
+
+ partition fsbl {
+ offset = 4K
+ in-partition-table = "no"
+ image = "bl2_sd.pbl"
+ }
+
+ partition ssbl {
+ offset = 1M
+ in-partition-table = "no"
+ image = "fip.bin"
+ }
+
+ partition rootfs {
+ offset = 8M
+ partition-type = 0x83
+ bootable = "true"
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/freescale/ls1028ardb/readme.txt b/board/freescale/ls1028ardb/readme.txt
new file mode 100644
index 0000000000..93396a4199
--- /dev/null
+++ b/board/freescale/ls1028ardb/readme.txt
@@ -0,0 +1,60 @@
+**************
+NXP LS1028ARDB
+**************
+
+This file documents the Buildroot support for the LS1028A Reference Design Board.
+
+for more details about the board and the QorIQ Layerscape SoC, see the following pages:
+ - https://www.nxp.com/design/qoriq-developer-resources/layerscape-ls1028a-reference-design-board:LS1028ARDB
+ - https://www.nxp.com/LS1028A
+
+Build
+=====
+
+First, configure Buildroot for the LS1028ARDB board:
+
+ make ls1028ardb_defconfig
+
+Build all components:
+
+ make
+
+You will find in output/images/ the following files:
+ - bl2_sd.pbl
+ - fip.bin
+ - fsl-ls1028a-rdb.dtb
+ - Image
+ - PBL.bin
+ - rootfs.ext2
+ - rootfs.ext4 -> rootfs.ext2
+ - sdcard.img
+ - u-boot.bin
+
+Create a bootable SD card
+=========================
+
+To determine the device associated to the SD card have a look in the
+/proc/partitions file:
+
+ cat /proc/partitions
+
+Buildroot prepares a bootable "sdcard.img" image in the output/images/
+directory, ready to be dumped on a SD card. Launch the following
+command as root:
+
+ dd if=output/images/sdcard.img of=/dev/sdX
+
+*** WARNING! This will destroy all the card content. Use with care! ***
+
+For details about the medium image layout, see the definition in
+board/freescale/ls1028ardb/genimage.cfg.
+
+Boot the LS1028ARDB board
+=========================
+
+To boot your newly created system:
+- insert the SD card in the SD slot of the board;
+- Configure the switches SW2[1:4] = 1000 (select SD Card boot option)
+- put a DB9F cable into the UART1 Port and connect using a terminal
+ emulator at 115200 bps, 8n1;
+- power on the board.
diff --git a/board/freescale/ls1028ardb/rootfs_overlay/boot/extlinux/extlinux.conf b/board/freescale/ls1028ardb/rootfs_overlay/boot/extlinux/extlinux.conf
new file mode 100644
index 0000000000..c08ddde10d
--- /dev/null
+++ b/board/freescale/ls1028ardb/rootfs_overlay/boot/extlinux/extlinux.conf
@@ -0,0 +1,4 @@
+label ls1028ardb-buildroot
+ kernel /boot/Image
+ devicetree /boot/fsl-ls1028a-rdb.dtb
+ append root=/dev/mmcblk0p1 rootwait
diff --git a/board/freescale/ls1028ardb/rootfs_overlay/etc/udev/rules.d/73-fsl-enetc-networking.rules b/board/freescale/ls1028ardb/rootfs_overlay/etc/udev/rules.d/73-fsl-enetc-networking.rules
new file mode 100644
index 0000000000..19f41634bd
--- /dev/null
+++ b/board/freescale/ls1028ardb/rootfs_overlay/etc/udev/rules.d/73-fsl-enetc-networking.rules
@@ -0,0 +1,16 @@
+# ENETC rules
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.0", DRIVERS=="fsl_enetc", NAME:="eno0"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.1", DRIVERS=="fsl_enetc", NAME:="eno1"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.2", DRIVERS=="fsl_enetc", NAME:="eno2"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.6", DRIVERS=="fsl_enetc", NAME:="eno3"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.0", DRIVERS=="fsl_enetc_vf", NAME:="eno0vf0"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.1", DRIVERS=="fsl_enetc_vf", NAME:="eno0vf1"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.2", DRIVERS=="fsl_enetc_vf", NAME:="eno1vf0"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:01.3", DRIVERS=="fsl_enetc_vf", NAME:="eno1vf1"
+# LS1028 switch rules
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p0", NAME="swp0"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p1", NAME="swp1"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p2", NAME="swp2"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p3", NAME="swp3"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p4", NAME="swp4"
+ACTION=="add", SUBSYSTEM=="net", KERNELS=="0000:00:00.5", DRIVERS=="mscc_felix", ATTR{phys_port_name}=="p5", NAME="swp5"
diff --git a/configs/ls1028ardb_defconfig b/configs/ls1028ardb_defconfig
new file mode 100644
index 0000000000..b6a5a04672
--- /dev/null
+++ b/configs/ls1028ardb_defconfig
@@ -0,0 +1,56 @@
+# Architecture
+BR2_aarch64=y
+BR2_cortex_a72=y
+
+# Toolchain
+# Linux headers same as kernel, a 5.10 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+
+# System configuration
+BR2_TARGET_GENERIC_HOSTNAME="ls1028a"
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
+BR2_ROOTFS_OVERLAY="board/freescale/ls1028ardb/rootfs_overlay"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/freescale/ls1028ardb/genimage.cfg"
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://source.codeaurora.org/external/qoriq/qoriq-components/linux"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="LSDK-21.08"
+BR2_LINUX_KERNEL_DEFCONFIG="imx_v8"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="$(LINUX_DIR)/arch/arm64/configs/lsdk.config"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="freescale/fsl-ls1028a-rdb"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+
+# Filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
+# BR2_TARGET_ROOTFS_TAR is not set
+
+# Bootloaders
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://source.codeaurora.org/external/qoriq/qoriq-components/atf"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="LSDK-21.08"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="ls1028ardb"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_RCW=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="BOOT_MODE=sd"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="fip.bin bl2_sd.pbl"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://source.codeaurora.org/external/qoriq/qoriq-components/u-boot"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="LSDK-21.08"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="ls1028ardb_tfa"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+
+# Host utilities
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_QORIQ_RCW=y
+BR2_PACKAGE_HOST_QORIQ_RCW_INTREE="ls1028ardb/R_SQPP_0x85bb/rcw_1300_sdboot.bin"
More information about the buildroot
mailing list