[Buildroot] [PATCH v2] board/pine64/pinecube: new board

[Thomas Petazzoni]

On Sun, 21 Aug 2022 13:04:18 +0200
Jan Havran <havran.jan at email.cz> wrote:

> Add support for PineCube with:
> - U-Boot 2022.04
> - Linux 5.15.61
> 
> PineCube is a low-powered, open source IP camera
> with the following specs:
>  - Allwinner S3 Cortex-A7
>  - 128 MiB DDR3
>  - 16 MiB SPI flash
>  - 5 MPx OV5640 camera
>  - MicroSD slot
>  - 10/100M Ethernet with passive PoE
>  - 802.11 b/g/n WiFi
>  - Bluetooth 4.1
>  - USB 2.0
>  - 26 pins GPIO header
>  - Microphone
>  - IR LEDs for night vision
> 
> Board homepage: https://www.pine64.org/cube/
> Board wiki:     https://wiki.pine64.org/wiki/PineCube
> 
> Signed-off-by: Jan Havran <havran.jan at email.cz>

Sorry for the super long delay, I have now applied your patch to our
next branch. It will be part of 2023.11. Don't hesitate to send a
follow-up patch updating to a newer kernel and/or U-Boot version.

Thanks a lot!

Thomas
-- 
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com