[Buildroot] [PATCH] configs/bananapi_m2_ultra: new defconfig
Giulio Benetti
giulio.benetti at benettiengineering.com
Mon Jul 31 14:40:54 UTC 2023
Add support for Bananapi M2 Ultra board based on the Allwinner V40/A40i
SoC.
- U-Boot 2023.07
- Linux 6.1.38
Board specifications: https://wiki.banana-pi.org/Banana_Pi_BPI-M2_Berry
Signed-off-by: Giulio Benetti <giulio.benetti at benettiengineering.com>
---
DEVELOPERS | 1 +
board/bananapi/bananapi-m2-berry/boot.cmd | 7 ++++
board/bananapi/bananapi-m2-berry/genimage.cfg | 34 +++++++++++++++++
board/bananapi/bananapi-m2-berry/readme.txt | 35 ++++++++++++++++++
configs/bananapi_m2_berry_defconfig | 37 +++++++++++++++++++
5 files changed, 114 insertions(+)
create mode 100644 board/bananapi/bananapi-m2-berry/boot.cmd
create mode 100644 board/bananapi/bananapi-m2-berry/genimage.cfg
create mode 100644 board/bananapi/bananapi-m2-berry/readme.txt
create mode 100644 configs/bananapi_m2_berry_defconfig
diff --git a/DEVELOPERS b/DEVELOPERS
index 29963278cb..d106fe953c 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1166,6 +1166,7 @@ F: board/freescale/imx6ullevk/
F: board/olimex/a*
F: configs/amarula_vyasa_rk3288_defconfig
F: configs/asus_tinker_rk3288_defconfig
+F: configs/bananapi_m2_berry_defconfig
F: configs/bananapi_m2_ultra_defconfig
F: configs/freescale_imx6ullevk_defconfig
F: configs/imx6ullevk_defconfig
diff --git a/board/bananapi/bananapi-m2-berry/boot.cmd b/board/bananapi/bananapi-m2-berry/boot.cmd
new file mode 100644
index 0000000000..a808fa0407
--- /dev/null
+++ b/board/bananapi/bananapi-m2-berry/boot.cmd
@@ -0,0 +1,7 @@
+setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait drm.debug=0xff
+
+mmc dev 0
+fatload mmc 0 $kernel_addr_r zImage
+fatload mmc 0 $fdt_addr_r sun8i-v40-bananapi-m2-berry.dtb
+
+bootz $kernel_addr_r - $fdt_addr_r
diff --git a/board/bananapi/bananapi-m2-berry/genimage.cfg b/board/bananapi/bananapi-m2-berry/genimage.cfg
new file mode 100644
index 0000000000..535f3dffee
--- /dev/null
+++ b/board/bananapi/bananapi-m2-berry/genimage.cfg
@@ -0,0 +1,34 @@
+image boot.vfat {
+ vfat {
+ files = {
+ "zImage",
+ "sun8i-v40-bananapi-m2-berry.dtb",
+ "boot.scr"
+ }
+ }
+
+ size = 64M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition u-boot {
+ in-partition-table = "no"
+ image = "u-boot-sunxi-with-spl.bin"
+ offset = 8K
+ size = 1016K # 1MB - 8KB
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ }
+}
diff --git a/board/bananapi/bananapi-m2-berry/readme.txt b/board/bananapi/bananapi-m2-berry/readme.txt
new file mode 100644
index 0000000000..838675ed94
--- /dev/null
+++ b/board/bananapi/bananapi-m2-berry/readme.txt
@@ -0,0 +1,35 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Bananapi M2 Berry. With the current
+configuration it will bring-up the board, and allow access through the
+serial console.
+
+Bananapi M2 Berry link:
+https://wiki.banana-pi.org/Banana_Pi_BPI-M2_Berry
+
+This configuration uses U-Boot mainline and kernel mainline.
+
+How to build
+============
+
+ $ make bananapi_m2_berry_defconfig
+ $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+ $ sudo sync
+
+Insert the micro SDcard in your Bananapi M2 Berry and power it up. The console
+is on the serial line, 115200 8N1.
diff --git a/configs/bananapi_m2_berry_defconfig b/configs/bananapi_m2_berry_defconfig
new file mode 100644
index 0000000000..95652e7939
--- /dev/null
+++ b/configs/bananapi_m2_berry_defconfig
@@ -0,0 +1,37 @@
+BR2_arm=y
+BR2_cortex_a7=y
+BR2_TOOLCHAIN_EXTERNAL=y
+BR2_TARGET_GENERIC_ISSUE="Welcome to Bananapi M2 Berry"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/bananapi/bananapi-m2-berry/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1.38"
+BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-v40-bananapi-m2-berry"
+BR2_PACKAGE_KMSCUBE=y
+BR2_PACKAGE_MESA3D=y
+BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_LIMA=y
+BR2_PACKAGE_MESA3D_OPENGL_EGL=y
+BR2_PACKAGE_MESA3D_OPENGL_ES=y
+BR2_PACKAGE_HTOP=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2023.07"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="bananapi_m2_berry"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS_BOOT_SCRIPT_SOURCE="board/bananapi/bananapi-m2-berry/boot.cmd"
--
2.34.1
More information about the buildroot
mailing list