[Buildroot] [PATCH v1 1/1] board/zynqmp: fix shellcheck issues

[Peter Korsgaard]

>>>>> "Peter" == Peter Korsgaard <peter at korsgaard.com> writes:

>>>>> "Neal" == Neal Frager <neal.frager at amd.com> writes:
 >> This patch cleans up board/zynqmp shellcheck issues.
 >> Signed-off-by: Neal Frager <neal.frager at amd.com>
 >> ---
 >> .checkpackageignore              | 3 ---
 >> board/zynqmp/kria/kv260/kv260.sh | 6 +++---
 >> board/zynqmp/post-build.sh       | 9 ++++-----
 >> board/zynqmp/post-image.sh       | 8 ++++----
 >> 4 files changed, 11 insertions(+), 15 deletions(-)

 >> diff --git a/.checkpackageignore b/.checkpackageignore
 >> index 10e70f0787..8d41aa2d37 100644
 >> --- a/.checkpackageignore
 >> +++ b/.checkpackageignore
 >> @@ -103,10 +103,7 @@ board/versal/post-build.sh Shellcheck
 >> board/versal/post-image.sh Shellcheck TrailingSpace
 >> board/zynq/post-build.sh Shellcheck
 >> board/zynq/post-image.sh Shellcheck
 >> -board/zynqmp/kria/kv260/kv260.sh Shellcheck
 >> board/zynqmp/kria/patches/uboot/v1-0001-makefile-add-multi_dtb_fit-dep.patch ApplyOrder Upstream
 >> -board/zynqmp/post-build.sh Shellcheck
 >> -board/zynqmp/post-image.sh Shellcheck
 >> boot/afboot-stm32/0003-Makefile-disable-stack-protector.patch Upstream
 >> boot/at91bootstrap/0001-eabi-fix.patch Upstream
 >> boot/at91bootstrap/0002-gcc-4.6.x-ldscript-fix.patch Upstream
 >> diff --git a/board/zynqmp/kria/kv260/kv260.sh b/board/zynqmp/kria/kv260/kv260.sh
 >> index e03d67d8b0..089c1ea58f 100755
 >> --- a/board/zynqmp/kria/kv260/kv260.sh
 >> +++ b/board/zynqmp/kria/kv260/kv260.sh
 >> @@ -6,7 +6,7 @@
 >> # drivers are missing.
 >> # This will be removed when u-boot can build the kv260 u-boot.itb natively.
 
 >> -UBOOT_DIR=$4
 >> +UBOOT_DIR="$4"
 
 >> -fdtoverlay -o ${UBOOT_DIR}/fit-dtb.blob -i ${UBOOT_DIR}/arch/arm/dts/zynqmp-smk-k26-revA.dtb ${UBOOT_DIR}/arch/arm/dts/zynqmp-sck-kv-g-revB.dtbo
 >> -${UBOOT_DIR}/tools/mkimage -E -f ${UBOOT_DIR}/u-boot.its -B 0x8 ${BINARIES_DIR}/u-boot.itb
 >> +fdtoverlay -o "${UBOOT_DIR}"/fit-dtb.blob -i "${UBOOT_DIR}"/arch/arm/dts/zynqmp-smk-k26-revA.dtb "${UBOOT_DIR}"/arch/arm/dts/zynqmp-sck-kv-g-revB.dtbo
 >> +"${UBOOT_DIR}"/tools/mkimage -E -f "${UBOOT_DIR}"/u-boot.its -B 0x8 "${BINARIES_DIR}"/u-boot.itb

 > I took the liberty to wrap some of these very long lines.


 >> diff --git a/board/zynqmp/post-build.sh b/board/zynqmp/post-build.sh
 >> index 0713bd1b05..d373ff4d4c 100755
 >> --- a/board/zynqmp/post-build.sh
 >> +++ b/board/zynqmp/post-build.sh
 >> @@ -3,14 +3,13 @@
 >> # genimage will need to find the extlinux.conf
 >> # in the binaries directory
 
 >> -BOARD_DIR="$(dirname $0)"
 >> -CONSOLE=$2
 >> -ROOT=$3
 >> +CONSOLE="$2"
 >> +ROOT="$3"
 
 >> mkdir -p "${BINARIES_DIR}"
 >> -cat <<-__HEADER_EOF > "${BINARIES_DIR}/extlinux.conf"
 >> +cat <<-__HEADER_EOF > "${BINARIES_DIR}"/extlinux.conf

 > The previous format was better (and my shellcheck doesn't complain about
 > it), so I've dropped this.

 > Committed with that fixed, thanks.

Committed to 2023.02.x, thanks.

-- 
Bye, Peter Korsgaard